Ships Blog Single Posts
Previous Post <<<------>>> Next Post
Date: Mon, 25 Apr 2022 01:18:00 GMT
Custom Build
So today I attacked the teak middle hatch. I took it apart, sanded
it, steel wooled it, varnished it and put it back together. No problem
right?... WRONG! The hardware is custom made and no two pieces are
identical. After 30 min of trial and error I finally found which part went
where like a puzzle. But, now we have a much better looking hatch.
I also bought a plastic bin for a cat box and hit it with a heat gun to
custom mold it to the floor where we put the cat box. It was an
experiment. some of the plastic melted through and left a hole but the
concept worked. I'm going to try again later to weld the plastic back
together.